Discover next-level comfort with the EOS AIR 600, designed for gamers who demand both performance and ergonomics. Featuring our EOS AIR MESH™, the seat and backrest deliver long-lasting resilience, bounce, and ventilation — keeping you cool through every session.
Learn More >Experience strong lumbar support with the EOS LUX 500, crafted in our premium EOS LUX SOFT FABRIC™. This resilient, breathable upholstery covers the chair from top to bottom, keeping you cool, supported, and relaxed through long sessions.
Learn More >The EOS FXM 300 delivers ergonomic support and lasting comfort at an accessible price point. Its high-back mesh design keeps you ventilated, while dynamic lumbar support adapts to your posture for healthy spine alignment in every position.
Learn More >In short. Pick your ergonomic gaming chair first by what the seat and back are covered in, then by how much the armrests and backrest move. The AIR 600 uses mesh throughout, adds 4D armrests and a footrest. The LUX 500 wears soft fabric and carries 3D padded armrests. The FXM 300 pairs a high mesh back with a 9 cm moulded foam seat and 1D armrests. Every model rides a Class 4 gas lift on 60 mm PU casters.
The material sets how the chair handles heat. Mesh lets air move through the surface you lean against, while padded fabric and dense foam hold warmth against the body. The EOS AIR 600 wraps both its seat and backrest in EOS AIR MESH, a springy weave that flexes, pushes back, and moves air while you sit.
The EOS LUX 500 goes the other way, covering its full body in EOS LUX SOFT FABRIC that stays breathable yet firm under weight. The EOS FXM 300 lands between the two, joining a tall ventilated back to a 9 cm molded foam cushion, so air reaches your spine while the seat stays padded. Which surface you choose decides how the seat feels once a session runs long.
The AIR 600 has the widest adjustment range, the LUX 500 sits in the middle, and the FXM 300 stays simple. Its armrests are 4D, raising, sliding forward and back, and swinging sideways. The LUX 500 uses padded 3D arms for height, reach, and angle. The FXM 300 gives 1D arms that only change height.
For the back, the AIR 600 offers the most: a backrest raised across 10-level steps, a lumbar you lock in two spots, and a seat that slides through 60 mm with three set depths, plus a 40 cm footrest that tilts 7 degrees. The LUX 500 relies on a broad Y-frame lumbar that flexes with you and a matched lift and recline locking upright or fully back. The FXM 300 keeps a moving lumbar and a recline that holds where set. Every chair finishes with a 2D headrest.
| AIR 600 | LUX 500 | FXM 300 | |
|---|---|---|---|
| Seat and back | EOS AIR MESH, seat and back | EOS LUX SOFT FABRIC, full body | Mesh back, 9 cm molded foam seat |
| Armrests | 4D, chrome-finished | Padded 3D | 1D height |
| Headrest | 2D, PU upholstered | 2D, PU upholstered | 2D, mesh |
| Lumbar | Dynamic, lockable in 2 positions | Large dynamic Y-frame | Dynamic |
| Backrest | 10-level height adaptable | Synchronized lift and recline, lockable | Dynamic recline, lockable |
| Seat sliding | 60 mm, lockable in 3 positions | Not listed | Not listed |
| Footrest | 40 cm extendable, 7° pivot | Not listed | Not listed |
| Base | Metal, Class 4 gas lift, 60 mm PU casters | Metal, sandblasted, Class 4 gas lift, 60 mm PU casters | Metal, Class 4 gas lift, 60 mm PU wheels |
Airflow. The AIR 600 uses mesh on seat and back so air passes through, the LUX 500 uses soft fabric, and the FXM 300 mixes a mesh back with a moulded foam seat.
Armrests. The D number counts directions each armrest moves, so the AIR 600 leads with 4D chrome arms, the LUX 500 has padded 3D, and the FXM 300 adjusts height only at 1D.
Fit to your legs. Only the AIR 600 slides its seat, with 60 mm travel lockable in 3 positions so the edge clears the knee, plus a 40 cm footrest that extends and pivots 7 degrees.
Shared build. All three sit on a metal base, roll on 60 mm PU casters, and rise on the strong Class 4 gas lift, while the LUX 500 base wears an anti-reflective sandblasted finish.